Nikon D2Hs User Manual page 77

Copying White Balance from a Photograph (d-1 – d-4 Only)
To copy a value for white balance from a photo-
graph on the memory card to a selected preset
(d-1 – d-4 only), highlight the preset in the thumb-
nail display and press the center of the multi se-
lector as described in steps 1–3 on page 61. The
menu shown at right will be displayed.
1
Press the multi selector up or down to high-
light Select image.
2
Press the multi selector to the right to display
the photographs on the memory card. Only
photographs taken with the D2Hs will be dis-
played; other images can not be selected.
3
Press the multi selector up, down, left, or right
to highlight the desired image. To view the
highlighted image full frame, press the
ton. Press the
thumbnail list.
4
Press the center of the multi selector to copy
the white balance value for the highlighted
photograph to the selected preset and return
to the thumbnail display. If the highlighted
photograph has a comment, the comment
will be copied to the comment for the selected
preset.
button again to return to the
but-
63