Nikon D2Hs User Manual page 103

Non-CPU Lenses
If the maximum aperture of the lens has been specifi ed
using the Non-CPU lens data item in shooting menu
( 126) when a non-CPU lens is attached, the current
f/-number will be displayed in the viewfi nder and top
control panel, rounded to the nearest full stop. Other-
wise the aperture displays will show only the number of stops (
erture displayed as
Exposure Warning
If the camera is unable to produce the correct exposure at the selected aperture, the
electronic analog exposure display (
un der- or over-exposure and one of the fol low ing in di ca tors will be dis played in the
con trol panel and viewfi nder shutter-speed displays:
Indicator
Subject too bright. Choose smaller aperture (larger f/-number) or lower sensitivity (ISO
equivalency;
Subject too dark. Choose larger aperture (smaller f/-number) or higher sensitivity (ISO
equivalency;
Aperture Lock
Aperture can be locked at the selected setting (
b3—EV Step (
This option controls whether changes to shutter speed and aperture are made in in cre -
ments equiv a lent to
f5—Command Dials (
Command dials > Change Main / Sub and Command dials > Aperture setting con-
trol whether aperture is assigned with the main command dial, the sub-command dial,
or the lens aperture ring. Regardless of the settings chosen, the command dials are
always used with type G lenses, the lens aperture ring with non-CPU lenses.
) and the f/-number must be read from the lens aperture ring.
91) in the viewfi nder will show the amount of
50), or use optional Neutral Density (ND) fi lter.
50), or use optional Speedlight.
181)
/
1 EV (the default setting), ½ EV, or 1 EV.
3
198)
Description
92).
, with maximum ap-
89