Battery Info; Wireless Lan - Nikon D2Hs User Manual

Battery Info

To view information on the EN-EL4 rechargeable
Li-ion battery currently inserted in the camera,
highlight Battery Info in the setup menu (
and press the multi selector to the right.
Option
Battery meter Current battery level expressed as a percentage (
Number of times shutter has been released with current battery
since battery was last charged. Note that camera may sometimes
Picture meter
release shutter without recording photograph, for example when
measuring value for preset white balance.
• Required: due to repeated use and recharging, calibration is
Calibration
• Not required: calibration not required.
Five-level display showing battery age. 0 (New) indicates that bat-
tery performance has not been affected; 4 (Replace) indicates that
Charging life
battery has reached end of charging life and should be replaced.

Wireless LAN

This option is only available when an optional
WT-2 / 2A or WT-1 / 1A wireless transmitter is at-
tached. To adjust wireless LAN settings, highlight
Wireless LAN in the setup menu (
press the multi selector to the right. Press the
multi selector up or down to highlight an option
and then press the multi selector to the right. The
options available vary depending on whether the
WT-2 / 2A or WT-1 / 1A is attached. See the manual
provided with the wireless transmitter for details.
required to ensure that battery level can be measured accurately;
recalibrate battery before charging (see MH-21 Quick Charger
instructions for details).
201)
Description
201) and
27).
WT-2 / 2A
WT-1 / 1A
211