Nikon D2Hs User Manual page 228

Network settings: Adjust settings for connection
to a wireless network. Press the multi selector up
or down to highlight an option and then press the
multi selector to the right.
Option
Wireless, TCP/IP, and FTP settings are stored in one of four banks
(A, B, C, and D). Store settings for different networks in different
Choose
banks and switch between them using this menu. Descriptive cap-
settings
tions can be added to bank names as described on page 160.
Load Load Wireless, TCP/IP, and FTP settings from camera memory
settings fi le? card.
Adjust SSID, ad hoc, encryption, and compatibility settings for con-
Wireless
nection to wireless network.
Adjust or view TCP/IP settings, including IP address, DNS, and gate-
TCP/IP
way settings.
Enter password and user ID and adjust settings for connection to ftp
FTP
server.
Pairing options: Pair the camera with comput-
ers running Nikon Capture 4 Camera Control
(requires Nikon Capture 4 version 4.2.1 or later,
available separately). Once paired with the cam-
era, the computer will automatically connect
when Camera Control is started, allowing the
camera to be controlled remotely from the computer. The camera can store
up to ten pairs of connections (note that each computer can control only one
camera at a time, and that each camera can be controlled by only one com-
puter at a time). Before pairing the camera with a computer, adjust wireless
network settings appropriately.
214
Description