Nikon D2Hs User Manual page 75

Selecting a White Balance Preset
To set white balance to a preset value:
1
Highlight White bal. preset in the white bal-
ance menu (
to the right. The menu shown at right will be
displayed. (To return to the shooting menu,
press the button.)
2
Presets are identifi ed by an icon or thumbnail,
a name (d-0 – d-4), and a comment. Press the
multi selector up, down, left, or right to high-
light the desired preset. To select the high-
lighted preset and return to shooting mode
without completing steps 3–5, press the
button.
3
Press the center of the multi selector to display
the menu shown at right. To view options for
other presets, highlight the name of the cur-
rent preset (d-0 – d-4) and press the multi
selector right.
Selecting a White Balance Preset: the WB Button
At a setting of
be selected by pressing the WB button and rotating the
sub-command dial. The current preset is displayed in
the rear control panel while the WB button is pressed.
52) and press the multi selector
(White bal. preset), presets can also
61