Checking Generator Brushes - Miller Big 40 C Owner's Manual

9-3. Checking Generator Brushes

Notes
OM-4427 Page 46
Minimum Length:
5/8 in. (16 mm)
New Length: 1-1/4 in. (32 mm)
Replace
Damaged Brushes
!
Stop engine and let cool.
1 Generator Brush
Mark and disconnect leads at brush hold-
er cap. Remove brushes.
Replace brushes if damaged or if brush
material is at or near minimum length.
1
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
Ref 215 158