5-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the front. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
5-2. Installing Welding Generator
Movement
Location/Airflow Clearance
18 in.
(460 mm)
18 in.
(460 mm)
18 in.
(460 mm)
SECTION 5 − INSTALLATION
OR
OR
18 in.
(460 mm)
18 in.
(460 mm)
OR
OR
install3 2008-01 − Ref. 800 652 / Ref. 800 477-A / 803 274 / 804 712
!
Do not move or operate unit
where it could tip.
!
Always securely fasten weld-
ing generator onto transport
vehicle or trailer and comply
with all DOT and other applica-
ble codes.
NOTICE − Do not install unit where
air flow is restricted or engine may
overheat.
.
See Section 4-2 for lifting eye rat-
ing.
.
See Section 5-3 for mounting in-
formation.
OM-4427 Page 23