NEC Express5800/T120h Manual page 37

Hide thumbs Also See for Express5800/T120h:

● About status of Agentless Management Service (AMS) on iLO Web interface.

When you recived the corrupted SNMP alert about physical drive status changed,confirm the location information of the

same event at "Information" - "Integarated Management log" of iLO5 Web interface.

When status of Agentless Management Service (AMS) is "Unknown" or "Not available" (*) on iLO Web interface, please

reset iLO.

After about 10 minutes, please restart Agentless Management Service (AMS) by following procedures.

* Verifying AMS status

Please confirm the status from iLO Web interface: [System Information] - [Summary] – [Subsystems and Devices] -

"Agentless Management Service".

If the status of Agentless Management Service (AMS) is "Unknown" or "Not available", iLO can't collect some part of

information of storage, network and iLO can't display those information correctly.

< Restarting AMS >

Procedure

・Windows

Navigate to the Windows Services page and restart AMS.

・Red Hat Enterprise Linux 7.x and 8.x

Enter the following command:

# systemctl restart smad

# systemctl restart amsd

・ESXi6.5/6.7

Enter the following command:

# /etc/init.d/amsd.sh restart

# /etc/init.d/ams.sh restart

* Command depends on the version of AMS you are using

・ESXi7.0

Enter the following command:

# /etc/init.d/amsd restart

- 37 -