5. Close the detergent dispenser. Press
the lid until it locks into position.
Use long washing programmes when
you use the detergent tablets. These
cannot fully dissolve with short washing
programmes and can decrease the
Use of rinse aid
Rinse aid makes it possible to dry the
dishes without streaks and stains.
The rinse aid dispenser automatically
adds rinse aid during the last rinsing
Do these steps to fill the rinse aid dispens-
1. Press the release button
of the rinse aid dispenser.
The multitab function is for combi detergent
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
Be sure that these tablets are applicable for
the water hardness in your area (refer to the
instructions on the packaging of the prod-
The multitab function deactivates the flow
of rinse aid and salt.
The multitab function deactivates the indi-
cators of salt and rinse aid.
The programme duration can increase if
you use the multitab function.
Activate or deactivate the multitab
function before the start of a washing
programme. You cannot activate or de-
activate the function when a washing
To activate the multitab function
• Press the multitab button, the multitab in-
dicator comes on. The function is activa-
LOADING CUTLERY AND DISHES
Refer to the leaflet 'Examples of Real-
2. Fill the rinse aid dispenser
3. Remove the spilled rinse aid with an
4. Close the rinse aid dispenser. Press the
Adjust the rinse aid dosage
Factory set: position 3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
Turn the rinse aid selector
decrease the dosage.
to open the
To deactivate the multitab function and
use separately detergent, salt and rinse
1. Press the multitab button, the multitab
2. Fill the salt container and the rinse aid
3. Adjust the water hardness to the highest
4. Start a washing programme without
5. When the washing programme is com-
6. Adjust the quantity of rinse aid.
Hints and tips
• Do not put in the appliance items that
aid. The mark 'max' shows the maxi-
absorbent cloth to prevent too much
foam during the washing programme.
lid until it locks into position.
– When you activate the multitab func-
tion, it stays on until you deactivate it.
indicator goes off. The function is deac-
pleted, adjust the water softener to the
water hardness in your area.
can absorb water (sponges, household
to increase or