Table of Contents
Advertisement
On/off button
Press this button to activate or deactivate
the appliance.
After ten minutes from the end of the wash-
ing programme, the Auto Off function auto-
matically deactivates the appliance. This
helps to decrease energy consumption.
Light bar
• When you switch on the appliance, the
light bar comes on.
• When you switch off the appliance, the
light bar goes off.
Display
The display shows:
• The electronic adjustment of the level of
the water softener
• The activation and deactivation of the
rinse aid dispenser (only with the multitab
function on)
• The time of the washing programme
• The remaining time to the end of the
washing programme
• The end of a washing programme (the
display shows a zero)
• The time of the delay start
• The alarm codes.
Delay start button
Press this button again and again to delay
the start of the washing programme from 1
to 24 hours.
Energy saver button
This function decreases the temperature in
the drying phase. The power consumption
decreases by 25%.
The dishes can be wet at the end of the
programme when you open the appliance
door. We recommend that you keep the
door ajar and let the dishes dry.
Press this button to activate the function.
The related indicator comes on.
Multitab button
Press this button to activate or deactivate
the multitab function. Refer to 'Multitab
function'.
Programme buttons
Press one of these buttons again and again
until the indicator of the washing pro-
gramme comes on. Refer to 'Washing pro-
grammes'.
Cancel button
Press this button to cancel a washing pro-
gramme in operation. Refer to 'Setting and
starting a washing programme'.
Programme indicators
When you set a washing programme the
related indicator comes on. Refer to 'Wash-
ing programmes'.
Function buttons
With these buttons you can:
• Adjust electronically the level of the water
softener. Refer to 'Setting the water soft-
ener'.
• Activate and deactivate the rinse aid dis-
penser (only with the multitab function
on). Refer to 'What to do if...'.
Setting mode
The appliance must be in setting mode
for these operations:
• To set and start a washing programme.
• To set and start a delay start.
• To adjust electronically the level of the
water softener.
• To deactivate or activate the rinse aid
dispenser (only with the multitab function
on).
Activate the appliance. The appliance
is in setting mode when:
• All the programme indicators come on.
• The display shows two horizontal status
bars.
Activate the appliance. The appliance
is not in setting mode when:
– Only one programme indicator is on.
– The display shows the time of the wash-
ing programme or of the delay start.
– It is necessary to cancel the pro-
gramme or the delay start to go back
to the setting mode. Refer to 'Setting
and starting a washing programme'.
electrolux 7
Hide quick links:
Advertisement
Table of Contents
