Figure 6. Remove the SSD plate (L)
Screw specifications
M2 x L4.5
Go to
https://support.lenovo.com/partslookup
part:
Solid-state drive (SSD) plate (L)
Remove the solid-state drive (SSD) plate (R)
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 30
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove three screws and then remove the SSD plate (R) carefully.
Figure 7. Remove the SSD plate (R)
Screw specifications
M2 x L4.5
32
Hardware Maintenance Manual
Number of screws
3
to look up the Lenovo part number of the following replacement
Number of screws
3