Remove The Solid-State Drive (Ssd) Plate; Remove The Solid-State Drive (Ssd) - Lenovo Legion 5 Series Hardware Maintenance Manual

Go to
https://support.lenovo.com/partslookup
part:
Battery pack

Remove the solid-state drive (SSD) plate

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove three screws and then remove the SSD plate carefully.
Figure 6. Remove the SSD plate
Screw specifications
M2 x L4.5
Go to https://support.lenovo.com/partslookup
part:
SSD plate

Remove the solid-state drive (SSD)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the solid-state drive (SSD) plate" on page 30
Step 1. Remove one screw and then remove the SSD by pulling it away from the slot.
30
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement
Number of screws
3
to look up the Lenovo part number of the following replacement