Remove The Edp Cable - Lenovo 82RB Hardware Maintenance Manual

Figure 35. Remove the two pieces of removable tape
Step 3. Lift the LCD panel slightly. Peel off the tape and then disconnect the EDP cable from the LCD panel
and then remove the LCD panel.
Figure 36. Disconnect the EDP cable and remove the LCD panel
Go to
https://support.lenovo.com/partslookup
replacement parts:
LCD panel
Removable tape

Remove the EDP cable

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 45
"Remove the LCD bezel" on page 47
"Remove the hinge cover" on page 47
"Remove the LCD panel" on page 48
Step 1. Disconnect the EDP cable from the sensor board. Release the EDP cable and then remove the EDP
cable.
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
49