About Sync Cords; Attaching A Sync Cord Or Ttl Converter - Ikelite 71722 Instruction Manual

About Sync Cords

Connecting a strobe via electrical sync cord provides faster strobe
recycle times as compared to a fiber optic connection, and prolongs
camera battery life.
To connect two strobes to the camera, you must use a dual
»
sync cord.
A second slave strobe may be triggered optically off of a
»
primary strobe connected by sync cord.

Attaching a Sync Cord or TTL Converter

1. Remove connector protectors and bulkhead caps from each
connection.
2. Apply a very thin, even layer of lubricant on all threads, sealing
surfaces, and the exposed portion of the plug o-ring. Do not allow
lubricant to get into the pins and receptacles of the plug or
bulkheads.
Bulkhead
cap
Bulkhead
Retaining
ring
21