Tuner Location Selection; Figure 2-3 | Acom 04At Tuner Mounting Possibilities; Table 2-1 | Package Contents - Acom AOM 04AT User Manual

Nr.
13 Washer, DIN 6798-A4.3-A2
14 Washer, DIN 9021-M4-A2
15 Cable clamps

2.2. Tuner Location Selection

The tuner can be installed under a shelter, outdoors, or at a fixed site (in a room) - with a special set of
installation accessories for walls, masts, or desks (see Section
).
contents
ACOM 04AT tuner can be located up to 100 m (330 ft) away from the shack.
Wall mounted tuner
Your new ACOM 04AT is shipped with the weather protective cover ACOM 04-WP mounted.
Regardless of which mounting option will be chosen (wall, mast, or desk - see
), in order to mount the selected bracket, the weather protection cover must be removed
mounting possibilities
(see
Figure 2-4 | ACOM 04AT tuner
The cover (Pos. 2) is fixed to the tuner body (Pos. 3) with 5 mounting brackets (Pos. 4). Place the tuner on a
flat leveled surface with connectors facing down. Unscrew the 5 bolts (Pos. 1) and carefully lift the weather
protection cover off the tuner body.
If the tuner will be desk mounted, the mounting brackets (Pos. 4) should be removed too. The mounting
brackets (Pos. 4) are removed by placing the tuner with the connectors facing up and unscrewing the 10 bolts
(Pos. 5), holding the brackets.
Page 26 of 88 | S e c t i o n INSTALLATION
User's Manual | ACOM 04AT | Remote Automatic Antenna Tuner and Switch
PACKAGE CONTENTS

Table 2-1 | Package contents

Figure 2-3 | ACOM 04AT tuner mounting possibilities

Mast mounted tuner
Figure 2-3 | ACOM 04AT tuner mounting possibilities
, Pos. (2)).
Image
and
1.7 Equipment Supplied
Desk mounted tuner
Figure 2-3 | ACOM 04AT tuner
Pcs.
10
5
5
Table 2-1 | Package
October 2023