If The Wall Mounting Option Is Chosen; Figure 2-5 | Wall Installation Bracket - Acom AOM 04AT User Manual

2.4.1. If the wall mounting option is chosen

Install the accessories set ACOM 04-WM for walls (see Section
) as described hereafter.
contents
Please, see

Figure 2-5 | Wall installation bracket

The weather protective cover (Pos. 1) is removed by unscrewing the five bolts (Pos. 2). The five cover holding
brackets (Pos. 3) are left in place, attached to the tuner body (Pos. 4).
Using the provided in the mounting kit four flat-head bolts (Pos. 5), the mast bracket (Pos. 6) is secured to
the tuner body (Pos. 4).
The weather protective cover (Pos. 1) is secured back in place with the five bolts (Pos. 2).
4
2
Please, see
Figure 2-6 | Tuner installed on a wall
The whole assembly (Pos. 1 & 2) is then secured to the wall with 6 screws/bolts (Pos. 3) with the weather
protective cover facing up (connectors facing down).
Screws/bolts and plugs for the wall are not included in the delivery. Use bolts/screws and
plugs suitable for your walls. If you are uncertain, seek professional advice.
Page 30 of 88 | S e c t i o n INSTALLATION
User's Manual | ACOM 04AT | Remote Automatic Antenna Tuner and Switch
.
Figure 2-5 | Wall installation bracket
3
Figure 2-5 | Wall installation bracket
.
CAUTION
and
1.7 Equipment Supplied Table 2-1 | Package
1
5
6
October 2023