Replacing The Headlight Bulb - Yamaha Star 2010 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Replacing the headlight bulb

This model is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Take care not to damage the follow-
ing parts:
G
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
7
using a cloth moistened with al-
cohol or thinner.
G
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
EAU42473
ECA10650
1. Do not touch the glass part of the bulb.
1. Remove the turn signal/position
light bracket cover by removing the
bolts.
1. Turn signal/position light bracket cover
2. Bolt
2. Remove the headlight unit by re-
moving the bolts on each side.
7-31
1. Bolt
3. Disconnect the headlight coupler,
and then remove the bulb cover.
1
2
1. Headlight bulb cover
2. Headlight coupler
4. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.