Table of Contents
Advertisement
Available languages
Available languages
2.7
MAKING CONNECTIONS: All connections must be compatible in size, shape, and strength. See Figure 4 for examples of
inappropriate connections. Do not attach snap hooks and carabiners:
A.
To a D-ring to which another connector is attached.
B.
In a manner that would result in a load on the gate. Large-throat snap hooks should not be connected to standard-
size D-Rings or other connecting elements, unless the snap hook has a gate strength of 16 kN (3,600 lbf) or greater.
C.
In a false engagement, where size or shape of the connector or connecting element is not compatible and, without
visual confirmation, would seem to be fully engaged.
D.
To each other.
E.
Directly to webbing or rope lanyard or tie-back material, unless the instruction manuals for both the lanyard and
connector specifically allow such a connection.
F.
To any object whose size or shape does not allow the connector to fully close and lock, or that could cause connector
roll-out.
G.
In a manner that does not allow the connector to align properly while under load.
2.8
LANYARD PARKING ATTACHMENT: Figure 5 illustrates lanyard parking. The lanyard parking attachment is for
attaching the free end of a lanyard or harness-mounted Self-Retracting Device when not connected to an anchorage
connection point for purposes of Fall Protection. Lanyard parking attachments must never be used as a Fall Protection
attachment element on the harness for connecting a lanyard or Self-Retracting Device (A).
When not connected to an anchorage connection point, an unconnected lanyard leg must be properly parked on the
Harness (B) or secured in the user's hands as in 100-percent tie-off applications (C). Free-hanging Lanyard Legs (D) can
trip the user or catch on surrounding objects resulting in a fall.
Figure 3 - Connector Compatibility
A
B
C
Figure 5 – Lanyard Parking Attachment
A
Figure 4 - Making Connections
A.
B.
E.
B
ü
ü
10
C.
D.
F.
G.
C
D
Advertisement
Table of Contents
