PowerTec 71845 Instruction Sheet

INSTRUCTION SHEET
Pocket Hole Jig Kit
SAFETY RULES
WARNING
For your own safety, read all of the rules and precautions before
operating tool.
WARNING
Always follow proper operating procedures as defined in this
manual even if you are familiar with use of this Pocket Hole
Jig or any tool used with this Pocket Hole Jig. Remember that
being careless for even a fraction of a second can result in
severe personal injury.
Before using another tool with this product, always read,
understand and follow the instructions and safety warnings in
the owner's manual for that tool. If you do not have the owner's
manual, obtain one from the tool's manufacturer before using it
with this product.
You must be familiar with the use of any tool or accessory
used with this Pocket Hole Jig. The supplier cannot be held
responsible for any accident, injury or damage incurred while
using this Pocket Hole Jig with any tool.
It is the responsibility of the purchaser of this product to ensure
that any person using this product reads and complies with all
instructions and safety precautions outlined in this manual and
the operating manual of the tool being used prior to use.
WARNING
Some dust created by operation of power tool contains
chemicals known to the State of California to cause cancer,
birth defects or other reproductive harm. To reduce your
exposure to these chemicals, work in a well ventilated area and
work with approved safety equipment. Always wear OSHA/
NIOSH approved, properly fitting face mask or respirator when
using such tools.
CAUTION
Do not modify or use this Pocket Hole Jig for any application
other than that for which it was designed.
FOLLOW ALL STANDARD SHOP SAFETY
PRECAUTIONS, INCLUDING:
• Keep children and visitors at a safe distance from work area.
• Keep work area clean. Cluttered work areas invite accidents.
Work area should be properly lit.
• Do not use power tools in dangerous environments. Do not
use power tools in damp or wet locations. Do not expose
power tools to rain.
• TURN OFF AND UNPLUG all power tools BEFORE making
any adjustments or changing accessories.
• Be alert and think clearly. Never operate power tools when
tired, intoxicated or when taking medications that cause
drowsiness.
• Wear proper apparel. Do not wear loose clothing, gloves,
neckties, rings, bracelets or other jewelry which may get
caught in moving parts of the tool.
• Wear protective hair covering to contain long hair.
• Wear safety shoes with non‑slip soles.
• Wear safety glasses complying with United States ANSI
Z87.1. Everyday glasses have only impact resistant lenses.
They are NOT safety glasses.
• Wear face mask or dust mask if operation is dusty.
• A guard or any other part that is damaged should be properly
repaired or replaced. Do not perform makeshift repairs.
• Use safety equipment such as featherboards, push sticks and
push blocks, etc., when appropriate.
• Maintain proper footing at all times and do not overreach.
• Do not force woodworking tools.
CAUTION
Think safety! Safety is a combination of operator common sense
and alertness at all times when tool is being used.
CAUTION
Do not use the Pocket Hole Jig until completely assembled
and you have read and understood this entire operating
manual and the operating manual of the tool being used with
this Pocket Hole Jig.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Model No. 71845
23‑0414