Outputting Examination Data To The Dicom Storage Server - Canon OCT-A1 Operation Manual

8 Settings
Outputting Examination Data to the DICOM Storage
Server
This section describes the settings to output images or reports to the DICOM storage
server.
1
Click [Add].
The [Output settings set] screen appears.
2
Set each item.
• [Set Name]
Input the name of the output destination. Be sure to input the value.
• [Contents]
Select the contents of data to be output.
[Image]: Outputs captured images.
[Report]: Outputs reports.
• [Type]
Select [DICOM (Network)].
• [Host Name]
Enter the host name or the IP address (IPv4). Be sure to input the value.
• [Port Number]
Enter the port number. Be sure to input the value.
220