Table of Contents
Advertisement
7 Report
11. OCTA image 2
The OCTA image set in the [OCTA Image Definitions] screen can be selected from the
list box.
Information
You can perform the following operations from the menu displayed by right-clicking
the OCTA image.
• [Density Map]: Select whether to show or hide the density map (optional product).
• [Density Grid]: Select whether to show or hide the density grid (optional product).
• [Density Analysis]: Select the density for analyzing.
• [AIP][MIP]: Select a method for projecting the OCTA image.
• [Projection Artifact Removal]: Select whether to apply the projection artifact removal
function.
• [Show Tools]: Show information about the Tools used on the enlarged OCTA screen.
• [Reset Brightness/Contrast]: Reset the brightness/contrast.
• [Save As]: Save the OCTA image.
• [Save As image with anonymization]: Anonymize the OCTA image and save it.
• [Save Binary Image]: Save a binary image or a skeleton image (optional product).
• [Mosaic]: Create a mosaic image (optional product).
If the projection artifact removal function is applied to the OCTA image, it is also
applied to the OCT image. You can also select whether to apply the function from the
menu displayed by right-clicking the OCT image.
Averaging OCTA Examination Images
(When OCTA 2 Is Installed)
You can average several OCTA examination images.
Averaging can be operated in RX Capture for OCT. It cannot be operated in RX Viewer.
1
Click [Averaging].
The [Select examination] screen appears.
142
Advertisement
Table of Contents
