Monoprice 30525 User Manual page 48

 Set Z Speed: Sets the speed at which the build plate moves.
 Limit Switch: Displays the status of the limit switches on each axis. If the
extruder or build plate are not moved to its maximum positions, the status will
show Not Triggered in green. If the extruder or build plate has been moved to its
maximum position, the status will show Triggered in red.
 Stepper Motor Controls: Click the Enable button to lock the stepper motor so
that it does not allow movement. Click Disable to unlock the stepper motor so
the extruder and build plate can be manually moved.
 LED Color: Allows you to set the LED color of the Inventor II printer.
 Motor Speed (RPM): Controls the speed of the filament feed wheel.
 Extruder Duration: Controls the motor rotation time.
 Forward: Feeds filament to the extruder.
 Reverse: Unloads filament from the extruder.
 Stop: Stops motor movement when feeding or unloading filament.
 Temperature Control: Allows you to set the target extruder temperature. Click
the Apply button to start heating the extruder.
Update Firmware: Allows you to update the printer's firmware.
On Board Preferences: Allows you to check the printer's name.
Machine Information: Displays information about the printer, including the firmware
version.
48