(GY27-0366) April 3, 2003
Fiscal memory card
Attention:
assembly. Removal of all FRUs from the fiscal interface housing is required before
replacing the memory card.
1. Remove the fiscal interface assembly from the printer (see "Fiscal interface
2. From the fiscal interface housing:
Figure 11. Fiscal Memory Card
3. Using a new fiscal interface housing with the memory card, reassemble the
4. Give the fiscal interface housing, with the memory card, to the proper authority.
5. After installing the assembled fiscal interface housing into the printer, place the
The memory card is permanently bonded to the fiscal interface
assembly" on page 6).
a. Remove the fiscal processor card (see "Fiscal processor card" on page 11).
b. Remove the CompactFlash (see "CompactFlash card assembly" on
page 12).
c. Remove fiscal interface card (see, "Fiscal interface card" on page 14).
d. Remove the keylock.
fiscal interface assembly.
printer into service according to the local fiscal regulations.
Removal and Replacement Procedures
Chapter 2. SureMark printer service manual supplement
15