Godox SL150II Bi - Bi-color LED Video Light Manual

Also See for SL150II Bi:

Instruction manual (9 pages)

Table of Contents

Contents

1 Foreword
2 Name of Body
3 LCD Panel
4 Included Items
5 Separately Sold Accessories
6 Power Connection
7 Operation
- 7.1 Mode Selection
- 7.2 Group GR, Channel CH and ID Setting
8 Wireless Control
9 Technical Data
10 Maintenance
11 IMPORTANT SAFETY INSTRUCTIONS
12 Documents / Resources
- 12.1 References
- 12.2 Download manual

Godox SL150II Bi - Bi-color LED Video Light Manual

Foreword

Thank you for purchasing this Godox Product!
With 8 special effects modes, strong power, soft illumination and abundant functions, Bi-color LED Video Light SL15011Bi can achieve creative shooting easily.

Main Features:

With color temperature adjustment from 2800K to 6500K.
With 9 FX special effects mode to simulate various of shooting scene.
Silent mode: without noises and interference.
Built-in Godox 2.4G wireless & wirelessly adjust parameters.
With stable light source and 0% to 100% precise light adjustment.
With 16 groups and 32 channels wireless control.
With U-type bracket to adjust different angles easily.
Bowens-mount enables to install various of accessories.
Clear LCD display.
Excellent heat dissipation.

Name of Body

LCD Panel

Included Items

Separately Sold Accessories

The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: RC-A6 Remote Control, Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc.
Separately Sold Accessories

Power Connection

Use the power cord to connect the LED light to an AC power source and turn on the power switch.

Operation

Mode Selection

LED silent mode: in this mode, the fan is turned off. There is no noises and interference in this mode. In silent mode, the brightness adjustment range is from 0% to 50%.

LED special effects modes: Short press the FX button to enter or exit the special effects. When entering the FX modes, FX icon will be displayed on the LCD panel. Then, turn the FX select dial to choose one mode from the 9 special effects modes to achieve creative shooting.

Display	FX1	FX2	FX3	FX4	FX5	FX6	FX7	FX8	FX9
Scene	Flash1	Flash2	Storml	Storm2	TV	Broken bulb	Camdle	Fire	Firework

warning Note: Only 6500K color temperature can be displayed in special effects mode.

LED strong power mode: turn on the fan to enter LED strong power mode and the power will up to the maximum value in this mode.

Light Brightness Adjustment

In LED mode, the light brightness of LED light can be adjusted by turning the DMX select dial from 0% to 100%. And the light brightness will be clearly displayed on the LCD Panel.

Color Temperature Adjustment

In continuous LED mode, turn the CCT/FX select dial to adjust color temperature from 2800K to 6500K. And the color temperature value will be precisely displayed.

Group GR, Channel CH and ID Setting

GR Setting:

Short press GR button to choose group from A, B, C, D, E, F and O to 9.

CH Setting:

Short press CH button to choose channel from 1 to 32.

ID Setting:

Long press GR and CH button to enter ID setting interface. Then, turn the DIM select dial to choose ID from OF and 01 to 99.

Wireless Control

With 2.4G wireless system, Bi-color LED Video Light SLI 5011Bi have receive and control function. Up to multiple groups of LED lights can be controlled. 32 channels and 99 wireless IDs are available with strong anti-interference capability. Please set the channels, groups and IDs of LED light to the same as those of RC-

A6 remote control before usage.

Adjusting ChannellGroup with the Remote Control

Press the CH/GR button and the group icon blinks.
Press the"-""+"button to choose a group (A to F, 0 to 9).
Press the CH/GR button twice and the channel icon blinks. Press the"-""+"button to choose a channel (1 to 32).

Adjusting ID with the Remote Control

Double click the CH/GR button and press the"-""+"button to choose ID from OFF or 01 to 99.

Adjusting Light Brightness with the Remote Control

Press the"-" "+"button to adjust the light brightness. Adjusting Color Temperature with the Remote Control
Press the SET button of the remote control and the color temperature icon blinks. Press the"-" "+"button to adjust the color temperature.

Remote control reset: press down "-" and "+" button simultaneously to reset.

warning Note: The wireless signal can be received only when the controller of LED light is powered on.

Setting color temperature range
The factory setting of remote control's color temperature range is 2800-6500K. In order to use remote control conveniently, color temperature range settings are added: when the remote control is off, hold down the SET button and turn it on to enter color temperature adjusting interface. Press CH/GR button to switch the lowest and highest color temperature value and press "-" or "+" button to change the value. Press the SET button to confirm it.

warning Note: the remote control needs to be purchased separately.

Technical Data

LED Video Light	SL150IIBi
Power Supply	AC100V-240V(50/60HZ)
Output Power	150W
Color Temperature Range	2800-6500K
100% Light Brightness(LUX,1M)	≈30000
CRI ≈	96
TLCI ≈	97
Light Brightness Range	0%-100%
Operation Temperature	-10~400
Channel	32
Group	16(A, B, C, D, E, F, 0-9)
Dimension (not included a standard reflector)	34x20x16cm
Net Weight (not include reflector and protect cover)	3.07Kg

* Product design and specifications are subject to change without notice.

Maintenance

This product, except consumables e.g. cable, is supported with a one-year warranty.
Avoid sudden impacts and the product should be dedusted regularly.
Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories.
Unauthorized service will void the warranty.
If the product had failures or was wetted, do not use it until it is repaired by professionals.
Changes made to the specifications or designs may not be reflected in this manual.

IMPORTANT SAFETY INSTRUCTIONS

When using your photographic equipment, basic safety precautions should always be followed, including the following:

Read and understand all instructions before using.
Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use.
Care must be taken as burns can occur from touching hot parts.
The appliance switch is provided with the symbols 0 indicating of and 1 indicating on. The symbols and may be used for this purpose.
Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged — until it has been examined by a qualified serviceman.
Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.
If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat.
Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Never yank cord to pull plug from outlet. Grasp plug and pull to disconnect.
Let appliance cool completely before putting away. Loop cord loosely around appliance when storing.
To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.
To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified serviceman when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is used subsequently
The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons.
Connect this appliance to a grounded outlet.
Disconnect this unit from its source of supply before replacing the projection lamp.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way

Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
Keep out of reach of children.
As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment.
Do not use the product in the presence of flammable gases, chemicals and other similar materials.

Hot parts! When the product is always on and flickering, please do not touch the high temperature part of the LED head.
When replacing product accessories, please turn off the LED light and perform a cold cut.