Godox LR160 - LED Ring Video Light Manual

Foreword

Thank you for purchasing this Godox Product!
This LED Ring Light LR160 is a continuous light with black color or pink color. Suitable for almost all shooting occasions, which can offer lighting for live, make up, portrait shooting, video, wedding, children photography, etc.

Features:

• High light brightness which can be freely adjusted its color temperature from 3300K8000K
• Stepless light brightness adjustment from 10%-100%.

Always keep this product dry. Do not use in rain or in damp conditions.

Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.

Keep out of reach of children.

As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment.

Do not use the light unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this light unit and fire or electromagnetic interference may result.

As this product has built-in lithium battery, do not disassemble, impact, squeeze or put it into fire. If serious bulge occurs, please do not use. Do not use or store the product if the ambient temperature reads over 50 ⁰C. Please charge the product with specialized charger and correctly operate it within the defined voltage and working temperate according to the instruction manual.

Observe precautions when handling batteries the defined voltage and working temperate according to the instruction manual.

• Do not put batteries into a fire or apply direct heat to them.
• Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove batteries when the product is not used for a long time or when batteries run out of charge.
• Should liquid from the batteries come into contact with skin or clothing, rinse immediately with fresh water.

Body

1. Main Body
2. Power Switch
3. Select Dial for Light Brightness
4. Select Dial for Color Temperature
5. LCD Panel
6. Lock Buttons of Lights
7. Lithium Battery Compartment
8. DC Power Jack
9. Mounting Bracket
10. Heat Dissipation Slot
11. Smartphone Holder/ Mirror Installation Slot
12. Mounting Hole for Camera Bracket

LCD Panel

Included Items

1. LED ring light
   
2. Mirror
   
3. Adapter
   
4. Smartphone holder
   

Power Management

1. Power Supply
   Two power supply modes are available:
   1. Using lithium battery: install two SONY NP-F970 model lithium batteries (purchased separately) in the battery compartment.
   2. Using DC power jack: This light can be powered by DC power supply. Use a charger to connect the light with the DC power supply.

Note:
* When using lithium battery, the Battery Level Indicator is displayed on the LCD panel. When the indicator blinks, the lithium battery power is low. Please recharge it or replace the battery immediately before usage in order to avoid forceful auto off.

Operation

1. Before Usage
   Insert the lithium batteries or connect the light with the DC power supply.
   
2. Power ON/OFF
   Long press the power switch to power the LED ring light on or off.
   
3. Light Brightness/CoIor Temperature Adjustment
   • Adjusting Light Brightness
     Turn the Select Dial for Light Adjustment to adjust the light brightness from 10% to 100%.
     
   • Adjusting Color Temperature
     Turn the Select Dial for Color Temperature to adjust color temperature from 3300K to 8000K.
     
4. Lock Buttons of Lights
   There are four lock buttons for the four lights of the LED ring light. When the ring light is powered on, press the lock button, and the corresponding light will be lightened.
   
5. LED Display
   Light Brightness: from 10% to 100%.
   Color Temperature: from 3300K to 8000K.
   Battery Level Indicator(using lithium batteries):
   

Technical Data