Use The Optical Socket; Use The Aux Socket - JVC TH-E431B Instruction Manual

USE THE OPTICAL SOCKET

USE THE COAXIAL SOCKET

USE THE AUX SOCKET

AUX / OPTICAL / COAXIAL / HDMI OPERATION
1. Ensure that the Soundbar is connected to the TV or audio device.
2. Press the (SOURCE) button repeatedly on the Soundbar or press the AUX, OPT/COA,
HDMI 1/2, HDMI eARC buttons on the remote control to select the desired mode.
The selected mode will show on the display.
3. Press the +/- (VOLUME) button to adjust the volume to your desired level.
NOTE:
The Soundbar may not be able to decode all digital audio formats from the input source. In this case,
the Soundbar will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV,
game console, DVD player, etc.) is set to PCM or Dolby Digital (Refer to the user manual of the input
source device for its audio setting details) with HDMI 1 / HDMI 2 / HDMI ARC / OPTICAL / COAXIAL
input. When selecting a different audio format, the Soundbar will display the following as follows:
Audio (abbreviation)
LPCM 2ch, LPCM 5.1ch, LPCM 7.1ch
Dolby Digital, Dolby TrueHD, Dolby Digital Plus
Dolby Atmos - Dolby TrueHD, Dolby Atmos - Dolby Digital Plus
Remove the protective cap of the OPTICAL socket,
then connect an OPTICAL cable (not included) to
the TV's OPTICAL OUT socket and the OPTICAL
socket on the Soundbar.
You also can use the COAXIAL cable (not included)
to connect the TV's COAXIAL OUT socket and
COAXIAL socket on the Soundbar.
Use a 3,5mm to 3,5mm audio cable (not included)
to connect the TV's or external audio device
headphone socket to the AUX socket on the
Soundbar.
Use a RCA to 3,5mm audio cable (included) to
connect the TV's audio output sockets to the AUX
socket on the Soundbar.
EN - 10
Display
PCM AUDIO
DOLBY AUDIO
DOLBY ATMOS