Optical Digital Output Signals - JVC HX-D77 Instructions Manual

USB Operations:
Unable to play back through the USB connection.
]
USB connection and setting is incorrect (see page 14).
The sound through the USB connection stops.
]
Noise and static electricity may stop the sound through the
USB connection. In this case, do the following operations:
• Disconnect and connect the USB cable again
• Restart the music software on your PC
• Turn off and on the system
If you still have a problem, reset the System.
While in standby...

OPTICAL DIGITAL OUTPUT Signals

DIGITAL AUDIO
Playback disc
DVD VIDEO
with 48 kHz, 16/20/24 bit
Linear PCM
with 96 kHz, Linear PCM
with Dolby Digital
with DTS Digital Surround
DVD-R/-RW in DVD-VR format
with 48 kHz, 16/20/24 bit
Linear PCM
with Dolby Digital
SVCD, VCD, CD
CD with DTS Digital Surround
MP3/WMA disc
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the
DIGITAL OUTPUT (OPTICAL) terminal if the discs are not copy-protected.
43
Downloaded From Disc-Player.com JVC Manuals
Main Unit
Press and hold until the display flashes.
The factory default settings are restored and all the settings you have made are
erased.
OUTPUT
STREAM/PCM
DTS bitstream
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
DTS bitstream
Timer operations:
Daily Timer does not work.
] The System has been turned on when the on-time comes.
Timer starts working only when the System is turned off.
ONLY
Output Signals
DOLBY DIGITAL/PCM
48 kHz, 16 bit Linear PCM*
48 kHz, 16 bit Linear PCM
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM*
Dolby Digital bitstream
44.1 kHz, 16 bit Linear PCM
No output
PCM ONLY
1
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM