Mooer Micro Series Owner's Manual

ModVerb
Modulation Reverb Pedal
Precautions
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V DC,
negative. Please do not use an AC adapter which supplies more than 9V DC.
Unplug the AC power adapter when not in use or during electrical storms.
Connections
Always turn off the power and all other equipment before connecting or
disconnecting. This will help prevent malfunction and damage to any of the devices.
Make sure to unplug all connection cables and power cords before moving this unit.
To avoid deformation, discoloration, or other serious damage,
do not expose this unit to the following conditions:
Direct sunlight
Magnetic fields
Excessively dusty or dirty location
Strong vibration or shock
Interference with other electrical devices and Cleaning
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Clean only with a soft, dry cloth.
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metal, or other objects into this unit.
Take care not to drop the unit, and do not subject it to shock or excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
Main Features
High quality reverb with 3 modulation types:Flanger, Vibrato, Phaser
DEPTH, DECAY, and MIX controls.
Tap tempo functionality
,center





Heat sources
Extreme temperature or humidity
High humidity or moisture
Frozen functionality
Small and compact size
True bypass
Pedal layout
DC IN
Flanger
Vibrato
5
Phaser
4
DEPTH DECAY
MIX
3
9
7. DC in power jack: Input for power supply, use a 9V DC regulated power
supply , ,160mA,center pin negative.
8. Input jack :
1/4" audio jack for connecting to the input device or
instrument.
9. Output jack : 1/4" audio jack, effect output for connection to amp or
other devices.
Modes:High quality reverb, 3 kinds of modulation effect with tap tempo and
frozen functionality.
Input:1/4" mono audio jack.（Impedance: 470k Ohms）
Output:1/4" mono audio jack（Impedance: 100 Ohms）
Power requirements: AC adapter 9V DC
recommend to use Mooer Micro Power.
Current Draw:160mA
Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
Weight:146g
Accessories:Owner's Manual
*Notes：Any specification's update will not be amended in this manual.
7
1.True bypass footswitch:
Engages and disengages the effect
Hold the footswitch to activate Freeze
6
effect.
2.On/Off Led:
Displays the on/off status of the pedal.
Controls tap tempo. Tap the LED 2 or
8
more times to synchronize the modulation
rate to your desired tempo.
3.Mix control:
Adjusts the reverb and modulation
effect mix.
2
4.DEPTH
Adjusts the depth of the modulation.
5. Toggle switch
Selects between Flanger,
Vibrato and Phaser modulation effects.
1
6. DECAY
Adjusts the decay of the reverb effect.
, center negative. Highly
Part No:620010601