AUVIO PBT4000 - Portable Bluetooth Speaker Manual

Package Contents

Please read this user's guide before using your new speaker.

• „ PBT4000 Portable Bluetooth Speaker
• „ AC Adapter „
• User's Guide

Features

• „ Sonic Emotion^® Absolute 3D technology* produces rich, full sound that permeates every inch of your room
• „ USB charging port charges your devices (such as mobile phones and MP3 players)
• „ Compatible with most Bluetooth enabled tablets, laptops, MP3 players, and smartphones with iOS or Android™ platforms

* Sonic Emotion Absolute 3D is the listening experience.

Note: You can download the free Auvio EQ App from the App Store^SM and Google Play^TM to customize your music.

Power Your Speaker

Using the included AC adapter, connect your speaker's DC IN jack to a standard wall outlet.

• „ If the battery power is very low, the charging indicator flashes red to alert you before turning off.
• „ The charging indicator lights red during charging and turns off when fully charged.
• „ A full charge takes about 3 hours. When fully charged, the speaker can operate for up to 4 hours at medium volume levels.

Use Your Speaker

1. Slide the OFF/ON switch to ON. The Bluetooth indicator flashes red and blue as the speaker searches for a Bluetooth-enabled device.
2. Activate your device's Bluetooth function (refer to your device's user's guide).
3. When AUVIO PBT4000 appears in the Bluetooth devices list, pair it to your device. If you are prompted for a PIN, enter 0000.
4. You can control your speaker through your device or with the speaker's buttons.
   

• „ Press the Sonic Emotion Absolute 3D button to turn on and off the 3D effect and indicator.
• „ To answer a call when your smartphone is connected, press and speak into the microphone ().

• „ Press and simultaneously to disable voice prompting. Press and simultaneously to enable voice prompting.
• „ If the speaker malfunctions, reset it by pressing twice when the Bluetooth indicator flashes red and blue.

Note: If you move the connected device too far from the speaker, the speaker disconnects from the device but resumes connection once the device is within range.

Device Not Pairing?

Many Bluetooth-enabled devices, such as speakers, remember the most recently paired source (music, smartphone, etc.) and automatically reconnect when turned on. This is convenient but can prevent you from connecting to a new source. If you cannot pair your speaker, you may need to disconnect it from its previous source.

Disconnect Your Device

Press and hold until the speaker says, "Searching." The speaker disconnects the current Bluetooth connection and starts searching for another Bluetooth device.

Charge Your Device

1. Set the A/B switch for _{USB Port} charging your device: Select A for 5V/1A Apple devices or B for other 5V/1A devices.
2. Use a USB cable (not included) to connect your device to the speaker's USB port.

Note: Consult your device's specifications before using the speaker's charging function.

Use AUX IN

For audio devices without Bluetooth functionality, use an audio cable (not included) to connect it to your speaker's AUX IN jack. The Bluetooth indicator lights red and then turns off.

Note:

• Connecting a device to both the AUX IN port and the USB port may produce interference noise. Disconnect one of the cables to avoid this noise.

• Bluetooth functionality is automatically deactivated when AUX IN is connected.
• When AUX IN is connected, the speaker controls only the volume. Use the controls on your device to control music playback.

Care and Caution

• Do not operate the speaker if it has been damaged
• Do not place heavy objects on top of the speaker.
• Place the speaker on a flat surface. To avoid electromagnetic interference, do not place the speaker on top of a TV or other electrical appliance.

Specifications

Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document.

For product support, call 1-866-315-0426