AUVIO HBT18600SE - Ultra-Compact Soundbar Manual

AUVIO HBT18600SE - Ultra-Compact Soundbar Manual

Also See for HBT18600SE:

Advertisement

AUVIO HBT18600SE - Ultra-Compact Soundbar Manual

Package Contents

  • Soundbar
  • RCA Cable
  • Remote Control
  • AC Adapter
  • AC Power Cord
  • User's Guide

Features

  • Provides powerful sound to enhance your listening experience
  • Sonic Emotion Absolute 3D technology* produces rich, full sound that permeates every inch of your room
  • Compatible with most Bluetooth®-enabled devices with iOS or Android™ platform
  • Remote for convenient controlling from a distance


*Sonic Emotion Absolute 3D is the listening experience.

Important Safety Instructions

  1. Read these instructions. Keep these instructions.
  2. Heed all warnings.
  3. Follow all instructions.
  4. Do not use this soundbar near water.
  5. Clean only with dry cloth.
  6. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  8. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits the soundbar.
  9. Use only attachments/accessories specified by the manufacturer.
  10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the soundbar. When a cart is used, use caution when moving the cart/soundbar combination to avoid injury from tip-over.
  11. Unplug this soundbar during lightning storms or when unused for long periods of time.
  12. Refer all servicing to qualified service personnel. Servicing is required when the soundbar has been damaged in any way, such as if the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the soundbar, it has been exposed to rain or moisture, it does not operate normally, or it has been dropped.

Warnings and Precautions

  • To reduce the risk of electric shock, do not remove cover (or back). There are no user-serviceable parts inside.
  • Do not expose the soundbar to dripping or splashing liquids. Do not place objects filled with liquids (such as vases) on the soundbar.
  • The power plug is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To completely disconnect the soundbar from the power supply, the power plug of the product shall be disconnected from the wall outlet completely.
  • Using the soundbar near fluorescent lighting may cause interference with the remote. If the soundbar is behaving erratically, move away from any fluorescent lighting.

Device Overview - Part 1 Device Overview - Part 2

Using the Soundbar

  1. Turn on your device and turn down its volume.
  2. Press to turn on the soundbar, and turn down its volume.
  3. Press INPUT to switch to , , (optical), (coaxial), or mode.
    You can also press BLUETOOTH on the remote to enter to Bluetooth mode directly.
  4. Press EQ to choose a sound option or press MUSIC, MOVIE, GAME, or OFF on the remote.
    You can further customize each option by adjusting BASS +/– and TREBLE +/–.
  5. After starting playback on your connected device, adjust the soundbar volume to a comfortable level.

Note: The soundbar enters standby mode if you pause it for more than 15 minutes or if the Bluetooth connection is broken for 15 minutes.

Using the Bluetooth Function

  1. After you turn on the soundbar and switch to Bluetooth mode ( scrolls on the display), the soundbar searches for a Bluetooth-enabled device ( scrolls on the display).
  2. Activate your device's Bluetooth function (refer to your device's user's guide).
  3. When AUVIO HBT18600SE appears in the Bluetooth devices list, pair it to your device. If you are prompted for a PIN, enter 0000.

Using the Remote Control

  1. Open the battery compartment and install two AAA batteries (not included), matching the polarity symbols (+ and ) marked inside.
    Using the Remote Control
  2. Point the remote at the center of the soundbar to control it.

Buttons Overview

Note: During Bluetooth connection, if you need to pair your soundbar to other Bluetooth devices, press and hold the BLUETOOTH button on the remote. The current Bluetooth connection is interrupted, and the soundbar starts searching for other Bluetooth devices.

Battery Notes:

  • Dispose of batteries promptly and properly. Do not burn or bury them. Use only fresh batteries of the required size and type.
  • Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.
  • If you do not plan to use the remote control for a long time, remove the batteries. Batteries can leak chemicals that can damage electronic parts.

Specifications

Power Input DC 15V, 4A
Output (RMS) 10W × 6
Frequency Response 65 Hz – 18 kHz
Drivers 75mm × 2, 70mm × 2, 50mm × 2
Bluetooth Connection Range 30 ft. (9.1m)
Bluetooth Protocol V2.1 + EDR Class 2
Dimensions (WHD) 18 × 4.6 × 5 in

Specifications are subject to change and improvement without notice.
Actual product may vary from the images found in this document.

Troubleshooting

Problem Solution

No sound and display

Makes sure the power supply is plugged into a working outlet and firmly connected to the soundbar.

Distorted sound

Check your source device to see if it is causing the distortion. Set the device and soundbar volume to a low level.

Unbalanced sound

If the volume remains low even when the soundbar's volume is turned all the way up, check the source device to make sure it is connected via a variable output. Make sure the output is not turned down too low.

Bluetooth function failure

  • Avoid electromagnetic interference or interference caused by other Bluetooth devices.
  • Make sure your Bluetooth device supports audio transfer, is discoverable and has its volume turned up.
  • If the connected device moves too far away from the soundbar, the soundbar disconnects from the device. Move the device close. The connection resumes automatically.
  • In Bluetooth mode but without Bluetooth connection, press and hold EQ on the soundbar or BLUETOOTH on the remote control to clear the list of devices paired to the soundbar. Then pair the soundbar to your device again
  • Disconnect power, then connect power again and turn on the soundbar.

For product support, call 1-866-315-0426
Ignition L.P.,
3102 Maple Ave., Suite 450,
Dallas, TX 75201

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download AUVIO HBT18600SE - Ultra-Compact Soundbar Manual

Advertisement

Need Assistance?

Do you have a question about the HBT18600SE that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents