Page 1
® T H E PE RF ORMANCE YOU NE ED 100W × 2 4’’ 3-Way Indoor/Outdoor Speakers Please read this user’s guide before using your new speakers. User’s Guide 4000016...
Package Contents Speakers (2) Thumb Screws (4) Speaker Wires (2) Washers (4) Tapping Screws (4) Foam Feet (8) Anchors (4) Mounting Brackets Bracket Protectors (4) User’s Guide Features Water-resistant and suitable for use on covered ...
Page 3
Amplifier – + – + – – + Connect to Your Amplifier Turn off the amplifier and all associated equipment. Connect one end of the speaker wire to the corresponding outputs on your amplifier, matching the polarities: the black wire is negative (–), and the black with grey wire positive (+).
Page 4
Connect the positive wire to the red speaker terminal by pressing the tab, inserting the wire into the hole, and releasing the tab. Repeat this procedure to connect the negative wire to the black terminal. Note: Make sure the polarities (+/ –) and impedance of the speakers and amplifier match.
Stick one supplied bracket protector on the inner surface of each end of the bracket, and mount the bracket with two tapping screws and two washers. Fasten the speaker to the mounting bracket with the two thumb screws. Note: If you position the speakers on a flat surface such as a desk, place foam feet on the bottom corners of each speaker to protect surfaces.
Limited Warranty Ignition L.P . warrants this product against defects in materials and workmanship under normal use by the original purchaser for one (1) year after the date of purchase. IGNITION L.P . MAKES NO OTHER EXPRESS WARRANTIES. This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods or lightning), or excess voltage or current;...
Need help?
Do you have a question about the 4000016 and is the answer not in the manual?
Questions and answers