AUVIO PBT4000 User Manual

®
T HE PERFORM ANCE YOU NE ED
®
PBT4000 Portable
Bluetooth Speaker
®
Please read this user's guide before using your new
speaker.
Logo User's Guide 4000593
Standard version
5 / Version 1.2 Brand / Confidential sonic emotion ag 2012
4000593_UG_EN_052214.indd 1-5
Package Contents
PBT4000 Portable Bluetooth Speaker
„
AC Adapter
„
User's Guide
„
Features
Sonic Emotion ® Absolute 3D technology* produces
„
rich, full sound that permeates every inch of your
room
USB charging port charges your devices (such as
„
mobile phones and MP3 players)
Compatible with most Bluetooth enabled tablets,
„
laptops, MP3 players, and smartphones with iOS or
Logo
Standard version
Android™ platforms
Sonic Emotion Absolute 3D is the
*
listening experience.
Note: You can download the free Auvio EQ App from the
App Store SM and Google Play TM to customize your music.
5 / Version 1.2 Brand / Confidential sonic emotion ag 2012
2
Power Your Speaker
Using the included AC adapter, connect your speaker's
DC IN jack to a standard wall outlet.
If the battery power is very low, the charging indicator
„
flashes red to alert you before turning off.
The charging indicator lights red during charging and
„
turns off when fully charged.
A full charge takes about 3 hours. When fully
„
charged, the speaker can operate for up to 4 hours at
medium volume levels.
OFF/ON
Charging Indicator
Bluetooth Indicator
3
Use Your Speaker
1. Slide the OFF/ON switch to ON. The Bluetooth
indicator flashes red and blue as the speaker
searches for a Bluetooth-enabled device.
Activate your device's Bluetooth function (refer to
2.
your device's user's guide).
When AUVIO PBT4000 appears in the Bluetooth
3.
devices list, pair it to your device. If you are
prompted for a PIN, enter 0000.
4. You can control your speaker through your device or
with the speaker's buttons.
Sonic Emotion Absolute
3D Button and Indicator Previous / Next Volume – / +
Microphone Play / Pause / Receive a Call /
Disconnect Bluetooth
Press the Sonic Emotion Absolute 3D ( ) button to
„
turn on and off the 3D effect and indicator.
To answer a call when your smartphone is
„
connected, press § / and speak into the
microphone ( ).
4
Press / and – simultaneously to disable voice
§
„
prompting. Press § / and + simultaneously to
enable voice prompting.
If the speaker malfunctions, reset it by pressing § /
„
twice when the Bluetooth indicator flashes red
and blue.
If you move the connected device too far from the
Note:
speaker, the speaker disconnects from the device but
resumes connection once the device is within range.
Device Not Pairing?
Many Bluetooth-enabled devices, such as
speakers, remember the most recently
?
paired source (music, smartphone, etc.)
and automatically reconnect when turned
on. This is convenient but can prevent you
from connecting to a new source.
If you cannot pair your speaker, you may
need to disconnect it from its previous
source.
Disconnect Your Device
Press and hold / until the speaker says, "Searching. "
§
The speaker disconnects the current Bluetooth
connection and starts searching for another Bluetooth
device.
5
5/22/2014 4:02:17 PM