Pro-Form GOLD'S GYM TRAINER 430i User Manual page 10

4. Pivot the Handrails (91) down to the horizontal
position.
5. Tighten an M10 x 70mm Screw (2) with an M10
Star Washer (5) into the bottom of each Handrail
(91) as shown; firmly tighten the Screws.
6. Slide the Right Inner Upright Cap (100) between
the Right Upright (95) and the Motor Hood (69).
Press the Right Outer Upright Cap (101) against
the Right Inner Upright Cap until they snap
together.
Repeat this step on the left side of the
treadmill.
4
5
91
5
2
6
10
91
91
91
5
2
95
100
69
101