2. Make sure that the power cord is unplugged.
Pivot the Right and Left Rear Feet (66, 67) down
from the shipping position as shown.
With the help of a second person, carefully raise
the Left and Right Uprights (94, 95) to the verti-
cal position.
IMPORTANT: Do not use the treadmill
with the Rear Feet (66, 67) in the shipping
position.
3. Tighten an M10 x 60mm Screw (1) and an M10 x
20mm Screw (3) into the Right Upright (95) and
the Base (83) as shown; do not fully tighten
the Screws yet.
Repeat this step on the left side of the
treadmill.
Then, tighten all four Screws (1, 3).
2
67
66
3
9
94
95
95
3
83
1