Outbound Policy - peplink PEPWAVE HD Dome Pro User Manual

17.1 Outbound Policy

Outbound policies for managing and load balancing outbound traffic are located at
Advanced>Outbound Policy> or Advanced>PepVPN>Outbound Policy .
button beside the Outbound Policy box:
There are three main selections for the outbound traffic policy:
● High Application Compatibility
● Normal Application Compatibility
● Custom
Note that some Pepwave routers provide only the Send All Traffic To setting here. See Section 12.1 for
.
details
High Application
Compatibility
Normal
Application
Compatibility
Custom
The default policy is Normal Application Compatibility .
Want to know more about creating outbound rules? Visit our YouTube Channel for a video tutorial!
https://www.peplink.com
Outbound Policy Settings
Outbound traffic from a source LAN device is routed through the same WAN
connection regardless of the destination Internet IP address and protocol. This
option provides the highest application compatibility.
Outbound traffic from a source LAN device to the same destination Internet IP
address will be routed through the same WAN connection persistently, regardless
of protocol. This option provides high compatibility to most applications, and users
still benefit from WAN link load balancing when multiple Internet servers are
accessed.
Outbound traffic behavior can be managed by defining rules in a custom rule
table. A default rule can be defined for connections that cannot be matched with
any of the rules.
182
Tip
Click the
Copyright @ 2021 Peplink