Docomo SH-03L Instruction Manual page 128

2
Follow the instructions on the screen and
enter the Osaifu-Keitai lock number
z When you set Osaifu-Keitai lock for the first
time,Setting lock number is necessary.
While Osaifu-Keitai lock is set, [
z
the status bar.
When the battery runs out while Osaifu-Keitai lock is
z
set, Osaifu-Keitai lock cannot be disabled. Be aware
of the battery level. If the battery runs out, disable
Osaifu-Keitai lock after charging the battery.
To use the menu of Osaifu-Keitai while Osaifu-Keitai
z
lock is set, disable Osaifu-Keitai lock.
The Osaifu-Keitai lock number is not deleted even if
z
you initialize the handset.
NFC settings
„
1
In the standby screen,
[Other settings]▶[NFC settings]
2
Select an item
Reader/Writer, P2P: Set whether to use the
„
Reader/Writer, P2P function.
Android Beam: Perform data communication using
„
Android Beam.
z For details on Android Beam
Beam"
] is displayed on
z▶[Settings]▶
☞
P. 162 "Android
iD appli
„
"iD" is electronic money provided by DOCOMO. You can
pay easily and conveniently by holding an Osaifu-Keitai in
which "iD" is set over scanning devices at stores. Card
information of multiple cards can be registered and you
can switch them according to the benefits etc.
z For using iD with Osaifu-Keitai, setting of iD appli is
required.
z Expense (annual fee etc.) for using iD service may vary
depending on the credit card company.
z For setting and checking iD appli overseas, packet
communication charges differ from those in Japan.
z For information on iD, refer to iD website.
h ( ttps://id-credit.com/)
126
(in Japanese only)
Tools/Apps