Epson WorkForce ST-C4100 Quick Start Manual

ST-C4100
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
Important Safety Instructions:
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson
product near water.
®
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
To reduce the risk of fire, use only a No. 26 AWG or larger
Caution:
telecommunication line cord.
1
Unpack
Do not open the ink bottles until you are ready to fill the ink
Note:
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
Do not touch the flat white cable or the ink tubes and
Caution:
their translucent cover.
2
Connect the power cord to the back of the product and to
an electrical outlet.
Do not connect to your computer yet.
Caution:
When using telephone equipment, you
2
Choose a setup method
The Epson Smart Panel app can help you set up your printer
®
through an interactive, step-by-step process using your
smartphone or tablet.
To use your mobile device
for setup, continue to
step 1.
1
Download the Epson Smart Panel app
from your device's app store. Do not
launch the app yet.
2
Press the power button to turn on the product.
Do not connect your product to your computer yet.
Note:
3
Launch the app and follow its instructions to set up your
product.
For information on setting up the fax, connecting your product
to a computer, using voice-activated printing, or solving
problems, or for details on reaching Epson support, see the
sections on the back of this sheet.
3
Fill ink tanks
Keep the ink bottles out of the reach of children and do not
Warning:
drink the ink.
This product requires careful handling of ink. If ink spills,
Caution:
wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
may print fewer pages compared with replacement ink bottles.
• Epson strongly recommends the use of genuine ink to ensure
optimal print quality and performance.
1
With the scanner unit raised, open the ink tank cover, then
open the cap for the black (BK) ink tank.
Refer to the color-coded sticker to identify the color of
Note:
each tank.
or
If you do not want to
use a mobile device for
setup, skip to the "Fill ink
tanks" section below.