Connecting To Power (Power Supply) - TRENDnet TFC-1600 User Manual

.

Connecting to Power (Power Supply)

The chassis ships with only one power supply. An optional second
power supply is available. When the chassis is equipped with two
power supplies, you can have the following advanced features.
Hot Swappable –
The design of the power system is based on an idea of providing
maximum flexibility and redundancy. In this way, you may
remove any one of the two power supplies without powering off
the system.
Redundancy –
During operation, both power supplies share the current load. In
case that one of them failed, the other will instantaneously take
100% of the load without any connection loss. Similarly, if one
power supply is removed from the Chassis, the chassis will
continue to function.
Protection System –
The power of each converter bay comes from the two shared
power supplies. Each bay is isolated from the others under a
certain protection mechanism, so that it is free from any problem
that might occur to the power supplies or faulty converter bay.
This is the best solution to protect your investment in media
converters.
Attention!
There is an optional solution for the backup power, -
48 volt DC to DC Power Supply.
10