Installing Media Converter - TRENDnet TFC-1600 User Manual

.Installing Media Converter

The chassis is equipped with sixteen media converter carriers, each of
which is fitted into bays of the chassis.
Step 1: To install a media converter module onto the chassis, you have to
unscrew the bay cover from the desired bay first.
Step 2 : Unscrew the thumbscrew counter clockwise and pull the media
converter out of the carrier as shown below.
Step 3: Carefully slide in the module and fasten the thumbscrew
clockwise until it is fully and firmly fitted into the slot of
the chassis.
Unscrew the hand screw counter clockwise
by using hand or screwdriver and pull the
media converter module out on the carrier
Insert the media converter module
into an available slot and fasten the hand
screw clockwise by using hand or screwdriver.
9