Connecting The Power; Dip Switches - TRENDnet TFC-1000 Quick Installation Manual

Connecting the Power

1. Connect the supplied power
cord to the back of the
Chassis.
2. Connect the power cord into
a power outlet.
3. Flip the switch to the ON
position to power up the
Chassis.

DIP Switches

Switch 1: ON: TX Full Duplex Mode
TFC-210
Switch 2: ON: FX Half Duplex
series
Switch 3: ON: LLCF Enable
Switch 4: ON: Pure Mode
Switch 1: ON: TX LLCF Enable OFF: TX LLCF (Disable)
TFC-2000
Switch 2: ON: Fiber LLCF Enable
series
* After changing the DIP Switch settings, power cycle the Fiber Converter.
** LLCF stands for Link Loss Carry Forward.
OFF: TX Auto- Negotiation
OFF: Fiber LLCF (Disable)
8
English
OFF: FX Full Duplex
OFF: LLCF Disable
OFF: Switch Mode