of the equipment.
5.
The power outlet should be within 1.8
meters of the switch.
Connecting to Power
1.
This Converter is a plug-and-play device.
2.
Connect the supplied AC to DC power
adaptor with a power voltage of
7.5Vdc/1.5Amp to the DC-Jack on the
converter, and then attach the plug into a
standard AC outlet.
ATTENTION!
The fiber port supports "full-duplex mode" only.
Please make sure the fiber connection to the media
converter's fiber port is manually set to 1000Mbps
Full-Duplex mode.
6