Operating Page - Volume Function (Level 1) - ABB L150 User Manual

2.4 Operating Page – Volume Function (Level 1)
2145. 3
UN-ACK
G1. 0 00
V. 2 3120
CodE
----
LEVEL1
•1 Displayed only if there is an active latch alarm.
Process Variable
2145. 3
12. 6
•1
Global Alarm Acknowledge (latch alarms only)
UN-ACK
ACK.
Specific Gravity
This is the value of specific gravity currently being
applied to the process variable (display only).
Volume
This is the current volume derived from the process
variable.
Security Code
Enter the correct code to access the Set Up Level
(Level 2) or the Configuration Level (Levels 3 and 4).
The default/factory-set code is 0.
[0 to 9999]
Level 1
Note. To select this frame from anywhere in this level,
press the
2 OPERATOR MODE
Normally displayed in engineering
units.
To view the input value (in electrical
units) press the
– alarm unacknowledged
– alarm acknowledged
key for a few seconds.
key.
11