Table of Contents
Advertisement
...2 OPERATOR MODE
...2.3 Operating Page – Max./Min./Average Functions (Level 1)
H150. 2
rSt-n
L130. 8
rSt-n
G1. 0 00
CodE
------
LEVEL1
•1 The maximum and minimum values are reset automatically on power-up and can
also be reset from a digital input – see Section 4.3.4.
10
Maximum Value
•1
This is the maximum value of the process variable since
the maximum was reset.
To reset the maximum value, select
the
Minimum Value
•1
This is the minimum value of the process variable
since the minimum was reset.
To reset the minimum value, select rSt-Y then press the
key.
Specific Gravity
This is the value of specific gravity currently being
applied to the process variable (display only).
Security Code
Enter the correct code to access the Set Up Level
(Level 2) or the Configuration Level (levels 3 and 4).
Level 1
Note. To select this frame from anywhere in this page,
press the
key.
rSt-Y
– reset
– do not reset
rSt-n
rSt-Y
– reset
– do not reset
rSt-n
[0 to 9999]
key for a few seconds.
then press
rSt-Y
Advertisement
Table of Contents
