Table of Contents
Advertisement
...3.2 Set Up Level (Level 2)
H150. 2
rSt-n
L130. 8
rSt-n
SPGrAV
1. 0 00
O. A dJ
•1 The maximum and minimum values are reset automatically on power-up and can
also be reset from a digital input – see Section 4.3.3.
Maximum Value
•1
This is the maximum value of the level input since the
maximum was reset.
To reset the maximum value, select
the
Minimum Value
•1
This is the minimum value of the level input since the
minimum was reset.
To reset the minimum value, select
the
Specific Gravity
Offset Adjustment
An offset can be applied to the level input to enable spot
calibration or the removal of system errors.
1. 0
3 SET UP MODE
key.
rSt-Y
– reset
– do not reset
rSt-n
key.
rSt-Y
– reset
– do not reset
rSt-Y
Enter the specific gravity of the liquid to be
measured.
[±10% of engineering range].
8
rSt-Y
then press
rSt-Y
then press
15
Advertisement
Table of Contents
