Installing Your Cable Modem; Connect The Sb6190 To Your Computer; Figure 3 - Sb6190 Connection Diagram - Arris SURFboard SB6190 User Manual

Installing Your Cable Modem

3

Connect the SB6190 to Your Computer

Before installing your SB6190:
•
Check with your service provider to ensure broadband cable service is available in your area.
•
Choose a location in your home where your computer and SB6190 are preferably near
existing cable and electrical wall outlets.
1. Check that a coaxial cable is already connected to a cable wall outlet or RF splitter (optional).
2. Connect the other end of the coaxial cable to the Cable connector on your SB6190.
Use your hand to tighten the connectors to avoid damaging them.
3. Connect the Ethernet cable (included) to the Ethernet port on your SB6190.
SURFboard SB6190 Cable Modem • User Guide
365-095-28610 x.2 Copyright 2015 ARRIS Enterprises, Inc. All rights reserved.
Installing Your Cable Modem
This product is for indoor use only. Do not route the Ethernet cable(s)
outside of the building. Exposure of the cables to lightning could create a
safety hazard and damage the product.
Figure 3 – SB6190 Connection Diagram
7