Connecting The Printer To The Host Computer; For Usb Model - Epson TM-C3400BK Technical Reference Manual

Connecting the Printer to the Host Computer

For USB Model

Connect the printer to the host computer by the USB cable.
 Do not turn the power on until the printer driver is installed.
 Make sure to use the USB cable included with the printer.
Insert the USB cable to the USB connector on the lower rear of the printer and arrange it as shown
below.
Make sure to put the USB cable through the cable hook as shown in the figure below to prevent the
cable from coming unplugged.
Cable hook: Prevents cable from coming unplugged.
Chapter 2 Setup
2
65