Paper type
Form
Backing paper width
Label width
Label length
When removing
all the fringes
When removing
right and left
fringes only
Gap between labels
Edge cutoff on left/right side
Edge cutoff width
Label edge R
Black mark width
Black mark length
Black mark centering position
Black mark interval
Paper thickness
Roll paper core
External diameter
Winding direction
Do not use the paper with a hole or cutout.
when using this type of paper, the label end and the black mark end of the black mark posi-
tion on the die-cut label must be matched.
Fine Media Label
Roll paper
30 to 112 mm {1.18 to 4.41"}
25.4 to 108 mm {1 to 4.25"}
25.4 to 1117.6 mm {1.0 to 44.0"}
15 to 1117.6 mm {0.59 to 44.0"}
3 to 6 mm {0.12 to 0.24"}
2 0.5 mm {0.079 0.02"}
1.5 mm {0.059"} or more
2 mm or less {0.079"}
13 mm {0.51"} or more
5 mm {0.19"} or more
8.5 1 mm {0.33 0.039"}
15 to 1117.6 mm {0.59 to 44"}
0.145 mm {0.0057"}
Outside diameter: 56.8 mm {2.24"}
Maximum 101.6 mm {4.0"}
Printing face must be facing outside.
Chapter 1 Product Overview
41
1