Table of Contents
Advertisement
Schedule
This Schedule can be used for the Firewall Rules and the URL filter.
Data - Schedule Screen
Schedule
Day
Session 1
Session 2
Start
Finish
Local Time
Time Zone
Adjust for Day-
light Savings Time
Use this NTP
Server
Current Time
Each day of the week can scheduled independently.
Two (2) separate sessions or periods can be defined. Session 2 can
be left blank if not required.
Enter the start using a 24 hr clock.
Enter the finish time using a 24 hr clock.
In order to display your local time correctly, you must select your
"Time Zone" from the list.
If your region uses Daylight Savings Time, you must manually
check "Adjust for Daylight Savings Time" at the beginning of the
adjustment period, and uncheck it at the end of the Daylight Savings
period.
If you prefer to use a particular NTP server as the primary NTP
server, check the checkbox "Use this NTP Server" and enter the
Server's IP address in the fields provided.
If this setting is not enabled, the default NTP Servers are used.
This displays the current time on the Wireless ADSL Router, at the
time the page is loaded.
Advertisement
Table of Contents
