TRENDnet TEW-657BRM User Manual page 55

UpStream
Connection Speed
Internet
Connection Method
Connection Status
Internet IP Address
WAN MAC Address
Connection Details
LAN
IP Address
Network Mask
DHCP Server
MAC Address
Wireless
SSID 1
MAC Address
SSID 2
MAC Address
Region
Channel
Wireless AP
Broadcast Name
If connected, displays the speed for the Up Stream (upload)
ADSL Connection.
Displays the current connection method, as set in the Setup
Wizard.
This indicates the current status of the Internet Connection
•
Active - Connection exists
•
Idle - No current connection, but no error has been detected.
This condition normally arises when an idle connection is au-
tomatically terminated.
•
Failed - The connection was terminated abnormally. This
could be caused by Modem failure, or the loss of the connec-
tion to the ISP's server.
If there is an error, you can click the "Connection Details" button
to find out more information.
This IP Address is allocated by the ISP (Internet Service Provid-
er). If using a dynamic IP address, and no connection currently
exists, this information is unavailable.
It displays the MAC address for the WAN.
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
The IP Address of the Wireless ADSL Router.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function. The value
will be "Enabled" or "Disabled".
This shows the MAC Address for the Wireless ADSL Router, as
seen on the LAN interface.
It displays the name of the SSID 1.
It displays the MAC address of the SSID 1.
It displays the name of the SSID 2.
It displays the MAC address of the SSID 2.
The current region, as set on the Wireless screen.
This shows the Channel currently used, as set on the Wireless
screen.
This indicates whether or not the Wireless Access Point feature is
enabled.
This indicates whether or not the SSID is Broadcast. This setting
is on the Wireless screen.
52