Download Print this page

TRENDnet TEW-659BRV Quick Installation Manual

300mbps wireless n vpn router
Hide thumbs Also See for TEW-659BRV:

Advertisement

300Mbps Wireless N VPN Router
TEW-659BRV
Ÿ Quick Installation Guide (1)
Ÿ Troubleshooting (7)
1.01

Advertisement

loading

Summary of Contents for TRENDnet TEW-659BRV

  • Page 1 300Mbps Wireless N VPN Router TEW-659BRV Ÿ Quick Installation Guide (1) Ÿ Troubleshooting (7) 1.01...
  • Page 2: Package Contents

    If necessary, contact your Internet Service Provider (ISP). 1. Verify that you have an Internet connection when connecting your computer directly to the Cable or DSL modem. Open your browser (e.g. Internet Explorer) and type in a URL (e.g. http://www.trendnet.com) in the address bar. Cable/DSL...
  • Page 3 2. Power off your Cable or DSL 6. Connect the Power Adapter to modem. the TEW-659BRV and then to a power outlet. Push the power 3. Disconnect the network cable button to the “On” position. from your Cable or DSL modem and your computer.
  • Page 4: Configure The Wireless Router

    3. Configure the Wireless Router Note: 1. It is recommended that you configure the Wireless Router from a wired computer. 2. For VPN configuration instructions please refer to the User's Guide. The User's Guide is located on the provided CD-ROM. 1.
  • Page 5 6. Select your Time Zone and then 9. You will need to configure the following: click Next. Wireless (Enable/ Disable): The default setting (Enable) must be selected. Select Disable if you do not want any wireless computers or devices to connect to this device. Network ID (SSID): The SSID is 7.
  • Page 6 Note: 1. To protect your network from any unauthorized access it is recommended to enable wireless encryption. 2. The example below is for WPA-PSK/WPA2-PSK (AES) security. If you select WPA-PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2.
  • Page 7 14. Open up your browser and enter in a URL (e.g. http://www.trendnet.com) to verify that you have Internet connection. Your configuration is now complete For detailed information regarding the TEW-659BRV’s configuration and advanced settings, please refer to the User's Guide included on the CD-ROM, or TRENDnet's website at http://www.trendnet.com.
  • Page 8: Troubleshooting

    Troubleshooting 1. I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-659BRV's web configuration page? 1. Check your hardware settings again by following the instructions in Section 2. 2.
  • Page 9 Windows XP/2000 1. Go into the Control Panel, double- click the Network Connections icon and then right-click the Local Area Connection icon and then click Properties. 2. Click Internet Protocol (TCP/IP) and then click Properties. Then click on Obtain an IP address automatically. 2.
  • Page 10 Device is not ready Status LED Reset: Hold 20 seconds to reset device to factory defaults. WPS: Hold 3 seconds to Reset/WPS Button activate WPS. If you still encounter problems or have any questions regarding the TEW-659BRV, please contact TRENDnet's Technical Support Department.
  • Page 14 TRENDnet 20675 Manhattan Place Torrance, CA 90501. USA Copyright ©2011. All Rights Reserved. TRENDnet.